Honda NC700XA Service Manual page 597

dummyhead dummyhead
FRONT WHEEL/SUSPENSION/STEERING
Loosen the top bridge pinch bolts [1].
When the fork is ready to be disassembled, loosen the
fork cap [2].
Hold the fork legs [3] and loosen the bottom bridge
pinch bolts [4] and lower the fork legs, then remove it.
DISASSEMBLY
Remove the dust seal [1] and stopper ring [2].
Be careful not to
scratch the fork
pipe.
Remove the following:
– Fork cap [1]
– O-ring [2]
– Spring collar [3]
– Spring seat [4]
Remove the fork spring [1].
Drain the fork fluid by pumping the fork pipe several
times.
17-26
[2]
[1] [3]
[1]
[1] [3]
[2] [4]
[4]
[2]
[1]