Headlight Aim - Honda NC700XA Service Manual

dummyhead dummyhead
ADJUSTMENT
Parking brake lever position can be adjusted at the
upper end of the parking brake cable and at the parking
brake caliper adjuster bolt.
Minor adjustment is made with the upper adjuster.
Release the dust cover [1].
Adjust the lever position by loosening the lock nut [2],
and turning the adjuster [3].
After adjustment, tighten the lock nut securely.
If the correct freeplay cannot be gained from the upper
adjuster, turn the adjuster all the way in.
Make major adjustments with the parking brake caliper
adjuster bolt.
Major adjustment is made with the parking brake caliper
adjuster bolt [1].
Loosen the lock nut [2].
Turn the adjuster bolt clockwise until bolt resistance is
felt (brake pads contact with the brake disc).
Then turn the adjuster bolt 1/4 turn counterclockwise
and tighten the lock nut to the specified torque while
holding the adjuster bolt.
TORQUE: 17 N·m (1.7 kgf·m, 13 lbf·ft)
Recheck the parking brake operation.

HEADLIGHT AIM

Support the motorcycle in an upright position.
Adjust the headlight aim vertically by turning the vertical
Adjust the headlight
beam adjusting screw [1].
aim as specified by
A clockwise rotation moves the beam up and
local laws and
counterclockwise rotation moves the beam down.
regulations.
[1]
[2]
NC700X/XA/XD:
NC700S/SA/SD:
MAINTENANCE
[3] [2]
[1]
[1]
[1]
3-25