Honda NC700XA Service Manual page 680

dummyhead dummyhead
Apply grease to the parking brake lever sliding surface.
Install the parking brake lever [1].
Align the parking brake lever hole with the ratchet B tab.
Apply grease to the washer sliding surface.
Install the washer [1] and E-clip [2].
Install the release shaft [1] and new spring pin [2] while
aligning the hole of the release shaft, ratchet A and
parking brake lever bracket.
Install the lower holder cap [1].
HYDRAULIC BRAKE
[1]
[2]
[1]
Align
Align
[1]
[2]
[1]
19-41