Honda NC700XA Service Manual page 551

dummyhead dummyhead
ENGINE REMOVAL/INSTALLATION
Release the rubber cap [1].
Remove the starter motor terminal nut [2] and
disconnect the starter motor cable [3].
Remove the starter motor mounting bolt [4] and
disconnect the ground cable [5].
Release the fuel feed hose [6] from the clamp [7].
Remove the drive sprocket bolt [1], washer [2] and drive
sprocket [3].
Remove the step holder mounting socket bolts [1] and
left step holder [2].
Remove the step holder mounting socket bolts [1] and
right step holder [2].
Do not twist the brake hose.
16-8
[2]/[3] [7]
[1]
[3]
[1]
[2]
[1]
[4]/[5] [6]
[2]
[1]
[2]