Honda NC700XA Service Manual page 598

dummyhead dummyhead
Set the fork slider [1] in a vise with a piece of wood or
Do not over-tighten
soft jaws to avoid damage.
the vise on the fork
slider.
Remove the fork socket bolt [2] and sealing washer [3].
If the fork piston
turns with the
socket bolt,
temporarily install
the fork spring,
spring seat, spring
collar and fork cap.
Remove the fork piston [1] and rebound spring [2] from
Do not remove the
the fork pipe [3].
fork piston ring [4],
unless it is
necessary to
replace with a new
one.
Using quick successive motions, pull the fork pipe out of
the fork slider.
Remove the oil lock piece [1] from the fork slider [2].
FRONT WHEEL/SUSPENSION/STEERING
[1]
[4] [2]
[1]
[2]/[3]
[1] [3]
[2]
17-27