Honda NC700XA Service Manual page 179

dummyhead dummyhead
PGM-FI SYSTEM
3. Sensor Unit Power Line Open Circuit Inspection
Disconnect the following:
– ECM 33P (Black) connector (NC700X/XA/S/SA)
[1]
– PCM 33P (Black) connector (NC700XD/SD) [2]
– PCM 33P (Gray) connector (NC700XD/SD) [3]
Check for continuities between the sensor unit 5P
(Black) connector [4] and ECM/PCM 33P connector.
Connection:
NC700X/XA/S/SA:
Yellow/red – Yellow/red
Green/yellow – Green/yellow
NC700XD/SD:
Yellow/violet – Yellow/violet
Green/yellow – Green/yellow
TOOL:
Test probe
Is there continuity?
YES
NO
4-18
07ZAJ-RDJA110
– Replace the ECM/PCM with a known good
one, and recheck.
– • Open circuit in the Yellow/red wire
• Open circuit in the Yellow/violet wire
• Open circuit in the Green/yellow wire
NC700X/XA/S/SA:
Y/R
G/Y
G/Y
[4]
NC700XD/SD:
Y/V
G/Y
G/Y
[4]
[1]
Y/R
[2]
Y/V
[3]