Engine Removal (Nc700X/Xa/S/Sa) - Honda NC700XA Service Manual

dummyhead dummyhead

ENGINE REMOVAL (NC700X/XA/S/SA)

Drain the engine oil (page 3-13).
Drain the coolant (page 8-6).
Fully slacken the drive chain (page 3-17).
Relieve the fuel pressure and disconnect the quick
connect fitting from the fuel injector side (page 7-4).
Remove the following:
– Left rear cover (page 2-29)
– Exhaust pipe/muffler (page 2-32)
– Radiator (page 8-9)
– Radiator reserve tank (page 8-14)
– Throttle body (page 7-15)
Disconnect the CKP sensor 2P (Red) connector [1] and
release the CKP sensor harness.
Remove the bolt [1] and rear brake reservoir stay/
reservoir [2].
Remove the socket bolts [3].
Lower the rear fender B [1].
Disconnect the alternator 3P (Black) connector [2].
Release the sidestand switch wire harness clamp [1].
Release the alternator wire harness [2].
ENGINE REMOVAL/INSTALLATION
[3] [1]
[2]
[2]
[1]
[1]
[3]
[1]
[2]
16-5