Honda NC700XA Service Manual page 468

dummyhead dummyhead
– Shift drum stopper arm [1]
– Stopper arm return spring [2]
– Stopper arm distance collar [3]
– Shift drum center dowel pins [4]
– 8 x 20 mm dowel pins [5] if necessary
INSPECTION
Check the gearshift spindle [1] and gearshift arm [2] for
wear or damage.
Check the return spring [3] for fatigue or damage.
Check the drum shifter guide plate [1], drum shifter [2],
ratchet pawls [3] and plungers [4] for wear or damage.
Check the plunger springs [5] for fatigue or damage.
INSTALLATION
Install the following:
– 8 x 20 mm dowel pins [1]
– Shift drum center dowel pins [2]
– Stopper arm distance collar [3]
– Stopper arm return spring [4]
– Shift drum stopper arm [5]
DUAL CLUTCH TRANSMISSION (DCT) (NC700XD/SD)
[2]
[3]
[1]
[4] [3]
[5]
[1]
[3]
[1]
[4] [5]
[2] [3]
[1]
[5]
12-113
[2]
[2]
[4]