Shelter/Side Cover (Nc700S/Sa/Sd) - Honda NC700XA Service Manual

dummyhead dummyhead
DISASSEMBLY/ASSEMBLY
Remove the screws [1].
Release the shroud tabs [2] from the side cover slits [3] and remove the shroud [4] from the side cover [5].
Assembly is in the reverse order of disassembly.

SHELTER/SIDE COVER (NC700S/SA/SD)

REMOVAL/INSTALLATION
Remove the following:
– Seat cowl (page 2-9)
– Side cowl (page 2-13)
Release the front wheel speed sensor 2P (Blue) connector (NC700SA/SD) [1] from the side cover.
Right side:
Remove the trim clip [2] and socket bolts [3].
Remove the shelter/side cover [4] by releasing the side cover tabs [5] from the grommet [6] and step holder [7].
Installation is in the reverse order of removal.
Route the seat lock cable [8] to the shelter mounting screws [9] upper side.
Right side:
[1]
[5]
[4]
[6]
[3]
FRAME/BODY PANELS/EXHAUST SYSTEM
[3]
[3]
[2]
[2]
[7]
[5]
[1]
[8]
[9]
[2]
[4]
[3]
2-15