Gearshift Linkage - Honda NC700XA Service Manual

dummyhead dummyhead
DUAL CLUTCH TRANSMISSION (DCT) (NC700XD/SD)
Install the shift control motor [1] and bolts [2], and
tighten the bolts.
TORQUE: 14 N·m (1.4 kgf·m, 10 lbf·ft)
Connect the shift control motor 2P (Black) connector
[3].
Install the following:
– Guard pipe (page 2-30)
– Left rear cover (page 2-30)

GEARSHIFT LINKAGE

REMOVAL
Remove the following:
– Shift control motor/reduction gears (page 12-109)
– Dual clutch (page 12-105)
– Gearshift spindle [1]
– Washer [2]
– Drum shifter collar [1]
– Bolts [2]
– Drum shifter guide plate/drum shifter assembly [3]
– Guide plate distance collar [1]
– Stopper arm side collar [2]
– Shift drum center bolt [3]
– Shift drum center [4]
12-112
[1]
[2]
[2]
[1]
[2]
[3] [1]
[1]
[3]
[3]
[4]
[2]