Honda NC700XA Service Manual page 22

dummyhead dummyhead
COOLING SYSTEM
ITEM
Water hose band screw
Fan motor shroud mounting bolt
Fan motor mounting screw
Cooling fan mounting nut
LUBRICATION SYSTEM
ITEM
Engine oil filter cartridge
CYLINDER HEAD/VALVES
ITEM
Cylinder head cover socket bolt
Breather plate mounting bolt
Rocker arm shaft bolt
Camshaft maintenance cap
Cam chain tensioner bolt
Cam sprocket bolt
Water hose band screw
Insulator band screw
Cylinder head special bolt
CLUTCH/GEARSHIFT LINKAGE (NC700X/XA/S/SA)
ITEM
Clutch center lock nut
Clutch lifter plate bolt
Primary drive gear mounting bolt
Shift drum stopper arm pivot bolt
Shift drum center socket bolt
Gearshift pedal adjuster lock nut
Gearshift pedal pivot bolt
THREAD
Q'TY
DIA. (mm) N·m (kgf·m, lbf·ft)
6 –
3 6
3 4
1 3
THREAD
Q'TY
DIA. (mm) N·m (kgf·m, lbf·ft)
1 20
THREAD
Q'TY
DIA. (mm) N·m (kgf·m, lbf·ft)
3 6
8 6
3 8
1 36
2 6
1 10
6 –
1 5
6 9
THREAD
Q'TY
DIA. (mm) N·m (kgf·m, lbf·ft)
1 18
4 6
1 10
1 6
1 8
2 6
1 8
GENERAL INFORMATION
TORQUE
– See page 8-9
See page 8-10
See page 8-14
8.4 (0.9, 6.2)
2.7 (0.3, 2.0)
1.0 (0.1, 0.7) Apply locking agent to the threads.
TORQUE
26 (2.7, 19) Apply engine oil to the threads.
TORQUE
10 (1.0, 7)
12 (1.2, 9) Apply locking agent to the threads.
Coating width; 6.5 ± 1.0 mm (0.26 ±
0.04 in) except 2.0 ± 1.0 mm (0.08 ±
0.04 in) from tip
29 (3.0, 21) Apply engine oil to the threads and
seating surface.
4.0 (0.4, 3.0) See page 10-11
See page 10-28
12 (1.2, 9)
56 (5.7, 41) Apply engine oil to the threads and
seating surface.
– See page 10-16
– See page 10-25
44 (4.5, 32) Apply molybdenum oil solution to the
threads and seating surface.
TORQUE
128 (13.1, 94) Apply engine oil to the threads and
seating surface.
Lock nut; replace with a new one and
stake.
12 (1.2, 9)
93 (9.5, 69) Apply engine oil to the threads and
seating surface.
12 (1.2, 9) Apply locking agent to the threads.
Coating width; 6.5 ± 1.0 mm (0.26 ±
0.04 in) except 2.0 ± 1.0 mm (0.08 ±
0.04 in) from tip
23 (2.3, 17) Apply locking agent to the threads.
Coating width; 6.5 ± 1.0 mm (0.26 ±
0.04 in) except 2.0 ± 1.0 mm (0.08 ±
0.04 in) from tip
10 (1.0, 7)
27 (2.8, 20)
REMARKS
REMARKS
REMARKS
REMARKS
1-17