Advertisement
84
6.3c Tap bearings into place using a socket as a drift
6.4 Renew seals together with bearings
7.4 Tighten the wheel spindle nut and fit new split pin
Chapter 5 Wheels, brakes and tyres
8
1
the rear wheel, follow the procedure described for checking the
front wheel for alignment of the rim, loose or broken spokes or
any other defects.
9
1
enclosure, and place these to one side. There is no need to
remove the left-hand engine casing. Slacken the rear brake
adjuster nut, and remove it to release the brake rod.
Reassemble the rear brake rod components to avoid loss.
\
2
accessible, then, using pointed-nosed pliers, prise off the spring
link, and separate the chain. Reassemble the joining link parts
on one end of the chain.
7.2 Ensure that lug engages in backplate when refitting wheel
9.2 Remove chain guard and separate the chain
Rear wheel: examination
Place the machine on the centre stand and before removing
Rear wheel: removal
Start by removing the two halves of the rear chain
Turn the rear wheel until the joining link in the drive chain is
Advertisement
Chapters
