Honda NC700XA Service Manual page 425

dummyhead dummyhead
DUAL CLUTCH TRANSMISSION (DCT) (NC700XD/SD)
2. N-D Shift Switch Inspection
Turn the ignition switch OFF.
Check for continuity between the switch side right
handlebar switch connector [1] terminals in each
switch position.
Connection:
N switch:
Light green/blue – Red
D switch:
Black/yellow – Red
Is there continuity with the switch pushed and
no continuity with the switch released?
YES
NO
3. N-D Shift Switch Input Line Open Circuit
Inspection
Connect the ECM test harness to the PCM
connectors (page 4-14).
Check for continuity between the wire harness side
right handlebar switch connector [1] and test
harness [2] terminals.
Connection: Light green/black – A18
Is there continuity?
YES
NO
12-70
– GO TO STEP 3.
– Faulty N-D shift switch
Black/yellow – A29
– GO TO STEP 4.
– • Open circuit in the Light green/black
wire
• Open circuit in the Black/yellow wire
NC700XD:
[1]
R
Bl/Y
NC700SD:
[1]
R
Lg/Bu
NC700XD:
[1]
Lg/Bl
Bl/Y
NC700SD:
[1]
Lg/Bl
Bl/Y
Lg/Bu
Bl/Y
A18
A29 [2]
A18
A29 [2]