Center Cover (Nc700X/Xa/Xd) - Honda NC700XA Service Manual

dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
DISASSEMBLY/ASSEMBLY
Remove the screws [1].
Release the shelter tab [2] from the side cover slit [3] and remove the shelter [4] from the side cover [5].
Assembly is in the reverse order of disassembly.
[2]
[3]

CENTER COVER (NC700X/XA/XD)

REMOVAL/INSTALLATION
Remove the air duct (page 2-13).
Remove the trim clips [1] and socket bolts [2].
Lift the center cover [3] and remove the trim clip, screws [4], right cable under cover [5] and left cable under
cover [6]
Be careful not to damage the center cover, cable under cover and cable by lifting the center cover too far.
Disconnect the seat lock cable [7] and luggage box lid lock cable [8] from the center cover and remove it.
Installation is in the reverse order of removal.
Route the cable properly (page 1-25).
[4]
[1]
[6]
[7]
2-16
[4]
[1]
[1]
[4]
[3] [2]
[8]
[8]
[5]
[5]
[7]