Honda NC700XA Service Manual page 268

dummyhead dummyhead
Insert the fuel pump filter edge [1] between the fuel
pump and pressure regulator [2].
Install the fuel level sensor assembly [3].
Install the chamber [4].
Install a new O-ring [1] to the fuel pump stay [2].
Install the fuel pump unit assembly [3] to the fuel pump
stay.
Align the fuel pump stay with fuel pump assembly
grooves.
Install the screws [1] and Black wire terminals [2].
Tighten the screws securely.
Connect the Pink wire connector [3] and Blue wire
connector [4].
INSTALLATION
Install a new packing [1] onto the fuel pump unit [2].
• Always replace the packing with a new one.
• Be careful not to pinch the dirt and debris between
the fuel pump unit and packing.
• Align the packing tab with the fuel pipe.
[2]
[1]
[3]
Align [3]
[2]
[1]/[2] [1]/[2]
[3]
[1]
FUEL SYSTEM
[4]
[1]
[4]
[2]
Align
7-13