Honda NC700XA Service Manual page 455

dummyhead dummyhead
DUAL CLUTCH TRANSMISSION (DCT) (NC700XD/SD)
Wash all the parts with a high flash point or non-
flammable solvent and blow through all oil passages
with compressed air to clean completely.
Check the linear solenoid valves [1] and valve body [2]
for scratches, scoring or damage.
LINEAR SOLENOID VALVE BODY
ASSEMBLY
Clean all the parts with compressed air. Make sure that
there is no dust or lint on any parts.
VALVE BODY
STOPPER PLATE
12 N·m (1.2 kgf·m, 9 lbf·ft)
SEPARATE PLATE
Coat linear solenoid valves [1] with engine oil.
Set the stopper plate [2] into the grooves in the solenoid
valves.
12-100
DOWEL PIN
[2]
LINEAR SOLENOID VALVES
VALVE BODY COVER
CKP SENSOR MOUNTING BOLTS
[1]
12 N·m (1.2 kgf·m, 9 lbf·ft)
WIRE CLAMP
[2]
[1]