Honda NC700XA Service Manual page 469

dummyhead dummyhead
DUAL CLUTCH TRANSMISSION (DCT) (NC700XD/SD)
Hold the shift drum stopper arm [1] with a screwdriver
and install the shift drum center [2] by aligning the
groove [3] with the dowel pin [4].
Apply locking agent to the threads of the shift drum
center bolt [1] (page 12-4).
Install the shift drum center bolt and tighten it.
TORQUE: 23 N·m (2.3 kgf·m, 17 lbf·ft)
Install the stopper arm side collar [2] and guide plate
distance collar [3].
Install the plunger springs [1], plungers [2] and ratchet
pawls [3] into the drum shifter [4] and set them in the
drum shifter guide plate [5].
Install the drum shifter guide plate/drum shifter
assembly [1].
Apply locking agent to the threads of the guide plate
bolts [2] (page 12-4).
Install the guide plate bolts and tighten them.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Install the drum shifter collar [3] onto the drum shifter.
12-114
[3] [4]
[2]
[3]
[1]
[3] [2] [1]
[5]
[2]
[1] [3]
[1]
[2]
[4]