dummyhead
dummyhead
DUAL CLUTCH TRANSMISSION (DCT) (NC700XD/SD)
4. Start the engine and let it idle. The "–" [1] on the shift
indicator starts blinking at interval of 2 seconds. The
Clutch Initialize Learning is successful, when the "–",
"D" and "S" indicators [2] go off.
Stop the engine.
The clutch initialize learning is unsuccessful, if the "–"
starts blinking at interval of 0.5 second or it goes off,
and the "D" and "S" indicators stay on. Perform the
initialize learning procedure from step 2 again.
5. Stop the engine.
6. Restart the engine, push the D switch of the N-D
shift switch and check that the "D" indicator comes
on.
12-122
[1]
[2]