Honda NC700XA Service Manual page 272

dummyhead dummyhead
ASSEMBLY
For IACV installation (page 7-23).
SENSOR UNIT
TORX SCREWS
Install a new O-ring [1] to the throttle body properly.
If the O-ring is not
installed properly,
When installing the sensor unit [2] to the throttle body,
the idle air will leaks
align the following:
and engine idle
– The TP sensor clip with the throttle valve boss
speed will be
– The sensor unit tab with the throttle body hole
unstable.
Install and tighten the sensor unit torx screws [1]
securely.
THROTTLE BODY
O-RING
TORX SCREWS
SETTING PLATE
IACV
O-RING
Align
[1]
[1]
FUEL SYSTEM
[2]
Align
7-17