Fan Cont. Relay - Honda NC700XA Service Manual

dummyhead dummyhead
Disconnect the siphon hose [1] and drain the coolant
from the reserve tank.
Installation is in the reverse order of removal.
• Align the radiator reserve tank tab with stay hole.
• Route the hoses properly (page 1-25).
Fill the radiator reserve tank with the recommended
coolant (page 3-15).

FAN CONT. RELAY

INSPECTION
Remove the maintenance lid (page 21-6).
Open the fuse/relay box cover and remove the FAN
CONT. RELAY [1].
Connect an ohmmeter to the FAN CONT. RELAY [1]
connector terminals.
Connect a 12 V battery to the FAN CONT. RELAY
connector terminals as shown.
There should be continuity only when 12 V battery is
connected.
If there is no continuity only when the 12 V battery is
connected, replace the FAN CONT. RELAY.
COOLING SYSTEM
[1]
[1]
[1]
8-15