Honda NC700XA Service Manual page 559

dummyhead dummyhead
ENGINE REMOVAL/INSTALLATION
Tighten the left front lower engine hunger bolt [1] to the
specified torque.
TORQUE: 54 N·m (5.5 kgf·m, 40 lbf·ft)
Tighten the right front lower engine hunger bolt [2] to
the specified torque.
TORQUE: 54 N·m (5.5 kgf·m, 40 lbf·ft)
Tighten the left upper engine hunger bolt [1] to the
specified torque.
TORQUE: 54 N·m (5.5 kgf·m, 40 lbf·ft)
Tighten the right upper engine hunger bolt [2] to the
specified torque.
TORQUE: 54 N·m (5.5 kgf·m, 40 lbf·ft)
Tighten the rear upper engine hunger nut [1] to the
specified torque.
TORQUE: 54 N·m (5.5 kgf·m, 40 lbf·ft)
Install the right step holder [1] and step holder mounting
socket bolts [2].
Tighten the step holder mounting socket bolts to the
specified torque.
TORQUE: 32 N·m (3.3 kgf·m, 24 lbf·ft)
16-16
Left side: Right side:
[1]
Left side: Right side:
[1] [2]
[1]
[2]
[2]
[1]