Honda NC700XA Service Manual page 115

dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
REMOVAL/INSTALLATION (NC700S/SA/SD)
Remove the shelter/side cover (page 2-15).
Remove the socket bolts [1], cable guide [2] and seat lock assembly [3].
Release the luggage box lid lock cable [4].
Release the following:
– Turn signal/hazard relay [5] from the luggage box tab
– Option 6P connector [6] from the luggage box
Remove the bolts [7], socket bolts [8] and luggage box [9].
Installation is in the reverse order of removal.
• For luggage box lid removal/installation (page 2-18).
• Route the cable properly (page 1-25).
[4]
[2]
2-20
[5] [9]
[4]
[1]
[3]
[8]
[7]
[6]