Honda NC700XA Service Manual page 568

dummyhead dummyhead
Connect the EOP switch 1P (Gray) connector [1].
Install the stay [2] and bolts [3] to the frame.
Tighten the bolts securely.
Install the spark plug wire clamp [1] to the frame.
Connect the spark plug cap [2].
Install the spark plug wire clamp [1] to the frame.
Connect the spark plug cap [2].
Connect the water hose [3] to the water pump.
Tighten the water hose band screw to the specified
range.
ENGINE REMOVAL/INSTALLATION
[1]
[1]
[2] [3]
0 – 1 mm
(0 – 0.04 in)
[3] [2]
[2]
[1]
16-25