Honda NC700XA Service Manual page 695

dummyhead dummyhead
ANTI-LOCK BRAKE SYSTEM (ABS)
4. Logic Ground Line Open Circuit Inspection
Turn the ignition switch OFF.
Remove the jumper wire from the ABS modulator
25P connector [1].
Check for continuity between the ABS modulator
25P connector of the wire harness side and ground.
Connection: Green/yellow – Ground
TOOL:
Test probe
Is there continuity?
YES
NO
5. Fuse Inspection
Check the ABS fuse 7.5 A (ABS MAIN) [1] in the
fuse box for blown.
Is the fuse blown?
YES
NO
6. Power Input Line Short Circuit Inspection
With the ABS fuse 7.5 A (ABS MAIN) removed,
check for continuity between the ABS modulator
25P connector [1] of the wire harness side and
ground.
Connection: Red/black – Ground
TOOL:
Test probe
Is there continuity?
YES
NO
20-14
07ZAJ-RDJA110
– GO TO STEP 5.
– Open circuit in Green/yellow wire
– GO TO STEP 6.
– GO TO STEP 7.
07ZAJ-RDJA110
– Short circuit in Red/black wire. Replace
the ABS fuse 7.5 A (ABS MAIN) with a
new one, and recheck.
– Intermittent failure. Replace the ABS fuse
7.5 A (ABS MAIN) with a new one, and
recheck.
[1]
NC700XA/SA shown:
[1]
[1]
G/Y
R/Bl