Honda NC700XA Service Manual page 549

dummyhead dummyhead
ENGINE REMOVAL/INSTALLATION
Disconnect the neutral switch connector [1].
Remove the wire band [2], bolt [3] and setting plate [4].
Release the following:
– Neutral switch wire [5]
– Sidestand switch wire [6]
– Fuel tank drain hose B [7]
Disconnect the VS sensor 3P (Black) connector [1].
Disconnect the injector 2P (Gray) connectors [1].
Release the clip [2] from the fuel rail.
Loosen the band screw [1] and disconnect the water
hose [2] from the water pump.
Disconnect the spark plug cap [3].
Release the spark plug wire clamp [4] from the frame.
16-6
[2]
[5]
[6] [1]
[1]
[2]
[3] [2]
[7]
[3]/[4]
[1]
[4]
[1]