dummyhead
dummyhead
HEADLIGHT
For headlight unit removal/installation.
– NC700X/XA/XD (page 2-26)
– NC700S/SA/SD (page 2-27)
BULB REPLACEMENT (NC700X/XA/
XD)
Disconnect the headlight 3P (Black) connector [1].
Remove the dust cover [2].
Unhook the bulb retainer [3] and remove the headlight
bulb [4].
Avoid touching halogen headlight bulb. Finger prints
can create hot spots that cause a bulb to break.
Install a new bulb, while aligning its tabs with the slots
of the headlight unit.
Hook the bulb retainer into the headlight unit groove.
Install the dust cover tightly against the headlight unit.
Install the dust cover with its "TOP" mark [5] and arrow
mark [6] facing up.
Connect the headlight 3P (Black) connector.
BULB REPLACEMENT (NC700S/SA/
SD)
Remove the headlight/headlight stay (page 2-27).
Remove the dust cover [1].
Unhook the bulb retainer [2] and remove the headlight
bulb [3].
Avoid touching halogen headlight bulb. Finger prints
can create hot spots that cause a bulb to break.
Install a new bulb, while aligning its tabs with the slots
of the headlight unit.
Hook the bulb retainer into the headlight unit groove.
Install the dust cover tightly against the headlight unit.
Install the dust cover with its "TOP" mark [4] and arrow
mark [5] facing up.
Install the headlight/headlight stay (page 2-27).
LIGHTS/METERS/SWITCHES
[3]
[2]
[5]
[4]
[1]
[4]
[6]
[5]
[2]
[1]
[3]
22-5