Honda NC700XA Service Manual page 702

dummyhead dummyhead
4. Failure Reproduction
Connect the ABS modulator 25P connector.
Erase the problem code (page 20-9).
Test ride the motorcycle above 30 km/h (18 mph).
Retrieve the problem code (page 20-8) and recheck
the ABS indicator [1].
Does the ABS indicator indicate the code "51, 52
or 53"?
YES
NO
PROBLEM CODE 54 (Fail-safe Relay)
1. Fuse Inspection
Check the ABS fuse 30 A (ABS SOL.) [1] in the fuse
box for blown.
Is the fuse blown?
YES
NO
2. Relay Power Input Line Short Circuit Inspection
Turn the ignition switch OFF.
Disconnect the ABS modulator 25P connector [1].
Check for continuity between the ABS modulator
25P connector of the wire harness side and ground.
Connection: Black/white – Ground
TOOL:
Test probe
Is there continuity?
YES
NO
– Faulty ABS modulator
– Pump motor is normal (intermittent failure).
– GO TO STEP 2.
– GO TO STEP 3.
07ZAJ-RDJA110
– Short circuit in Black/white wire
– Intermittent failure. Replace the ABS fuse
30 A (ABS SOL.) with a new one, and
recheck.
ANTI-LOCK BRAKE SYSTEM (ABS)
NC700XA/SA shown:
[1]
[1]
[1]
Bl/W
20-21