dummyhead
dummyhead
SHIFT CONTROL MOTOR/REDUCTION
GEARS
REMOVAL
Remove the following:
– Guard pipe (page 2-30)
– Left rear cover (page 2-30)
Disconnect the shift control motor 2P (Black) connector
[1].
Remove the bolts [2] and shift control motor [3].
Remove the bolt [1], wire clip stay [2] and TR sensor [3].
Remove the bolts [1] and reduction gear cover [2].
Remove the dowel pins [1] and gasket [2].
Remove the reduction gears [3].
DUAL CLUTCH TRANSMISSION (DCT) (NC700XD/SD)
[2]
[3]
[3]
[3]
[2]
[1]
12-109
[1]
[1]
[2]
[1]
[2]