Honda NC700XA Service Manual page 631

dummyhead dummyhead
REAR WHEEL/SUSPENSION
Remove the step holder mounting socket bolts [1] and
right step holder [2].
Do not twist the brake hose.
Remove the swingarm pivot nut [1], washer [2], pivot
bolt [3] and swingarm [4].
DISASSEMBLY/INSPECTION
Remove the drive chain slider mounting screws [1] and
washers [2].
Remove the drive chain slider [3] by releasing the slider
slit [4] from the swingarm tab and slider tabs [5] from
the swingarm holes.
Remove the pivot collars [1], dust seals [2] and distance
collar [3] from the swingarm pivot.
Check the collar for wear, damage or fatigue.
Check the needle bearings [4] for damage or loose fit,
replace it if necessary (page 18-19).
18-18
[1]
[4]
[5] [1]/[2]
[4] [1]
[2]
[1]/[2]/[3]
[3]
[4]
[1]
[2]
[3]
[2]