Pcv; Delay Valve - Honda NC700XA Service Manual

dummyhead dummyhead
ANTI-LOCK BRAKE SYSTEM (ABS)

PCV

REMOVAL/INSTALLATION
Drain the brake fluid from the lever/pedal brake line
hydraulic systems (page 19-11).
Remove the luggage box (page 2-19).
Loosen the brake pipe joint nuts [1] and disconnect the
brake pipe from the PCV [2].
Remove the PCV mounting bolt (long) [3], PCV
mounting bolt (short) [4] and PCV.
Be careful not to bent or damage the brake pipes.
Installation is in the reverse order of removal.
TORQUE:
PCV mounting bolt:
12 N·m (1.2 kgf·m, 9 lbf·ft)
Brake pipe joint nut:
14 N·m (1.4 kgf·m, 10 lbf·ft)
Apply brake fluid to the joint nut threads and sliding
surface.

DELAY VALVE

REMOVAL/INSTALLATION
Drain the brake fluid from the lever/pedal brake line
hydraulic systems (page 19-11).
Remove the luggage box (page 2-19).
Loosen the brake pipe joint nut [1], and disconnect the
brake pipe from the delay valve [2].
Remove the delay valve mounting bolts [3] and delay
valve.
Be careful not to bent or damage the brake pipes.
Installation is in the reverse order of removal.
TORQUE:
Delay valve mounting bolt:
12 N·m (1.2 kgf·m, 9 lbf·ft)
Brake pipe joint nut:
14 N·m (1.4 kgf·m, 10 lbf·ft)
Apply brake fluid to the joint nut threads and sliding
surface.
20-28
[2]
[3]
[1]
[4] [3]
[1]
[2]