Honda NC700XA Service Manual page 554

dummyhead dummyhead
Disconnect the VS sensor 3P (Black) connector [1] and
EOT sensor 2P (Black) connector [2].
Disconnect the injector 2P (Gray) connectors [1].
Release the clip [2] from the fuel rail.
Disconnect the TR sensor 3P (Black) connector [1] and
remove it from the ABS modulator stay.
Loosen the band screw [1] and disconnect the water
hose [2] from the water pump.
Disconnect the spark plug cap [3].
Release the spark plug wire clamp [4] from the frame.
ENGINE REMOVAL/INSTALLATION
[2]
[2]
[3] [2]
[1]
[1]
[1]
[4]
[1]
16-11