Wheel Speed Sensor Replacement - Honda NC700XA Service Manual

dummyhead dummyhead
WHEEL SPEED SENSOR
REPLACEMENT
Refer to procedure for the pulser ring removal/
installation.
– Front pulser ring (page 17-22)
– Rear pulser ring (page 18-7)
FRONT WHEEL SPEED SENSOR REMOVAL/
INSTALLATION
Remove the bolts [1] and radiator lower stay [2].
Release the radiator boss from the radiator mounting
rubber [3].
Release the fan motor 3P (Gray) connector [1], air
cleaner housing drain hose [2] and spark plug wire [3]
from the radiator.
Remove the shroud/side cover (page 2-14).
NC700XA/XD:
Remove the front wheel speed sensor 2P (Blue)
connector [1] from the frame and disconnect the
connector.
ANTI-LOCK BRAKE SYSTEM (ABS)
[1]
[3] SLITS [1]
[2]
NC700XA: NC700XD:
[1]
[1]
[2]
Align
[1] [3]
20-25