Honda NC700XA Service Manual page 483

dummyhead dummyhead
ALTERNATOR/STARTER CLUTCH
Release the battery box drain hose (NC700X/XA/S/SA)
[1] from the stay.
Loosen the alternator cover bolts [2] in a crisscross
pattern in 2 or 3 steps, and remove the bolts and stays
[3].
Remove the alternator cover [4].
The alternator cover (stator) is magnetically attracted to
the flywheel, be careful during removal.
Remove the dowel pins [1], oil orifice [2] and O-ring [3].
Clean off any sealant from the alternator cover mating
surfaces.
Do not loosen the alternator cover sealing bolt [1].
13-6
NC700X/XA/S/SA:
[4]
[2]
[1]
NC700XD/SD:
[4]
[2]
[1]
[3]
[3]
[2]/[3]
[1]
[1]