Honda NC700XA Service Manual page 553

dummyhead dummyhead
ENGINE REMOVAL/INSTALLATION
Remove the bolt [1] and rear brake reservoir stay/
reservoir [2].
Remove the socket bolts [3].
Lower the rear fender B [1].
Disconnect the alternator 3P (Black) connector [2].
Release the sidestand switch wire harness clamp [1].
Release the alternator wire harness [2].
Remove the wire band [1] and release the wires and
hose from the stay [2].
Remove the sidestand switch wire clamp [3] from the
stay.
Disconnect the shift control motor 2P (Black) connector
[4] and neutral switch connector [5].
16-10
[3] [1]
[2]
[2]
[1]
[1]
[3]
[1]
[2]
[2] [5]
[4] [3]