Battery Box - Honda NC700XA Service Manual

dummyhead dummyhead

BATTERY BOX

REMOVAL/INSTALLATION
Remove the following:
– Battery (page 21-6)
– Luggage box (page 2-19)
Remove the bolts [1] and ignition coil stay [2] from the battery box [3].
Release the following:
– Fuse box [4]
– Starter relay switch [5]
– CKP sensor harness [6]
– Battery negative (–) cable [7]
– Main wire harness [8]
– Junction B 14P (Orange) connector [9]
– Junction G 14P (Orange) connector [10]
– DLC [11]
– Battery positive (+) cable [12]
Remove the socket bolts [13] and battery box while releasing the grommets [14] from the frame bosses [15].
Disconnect the battery box drain hose [16].
Remove the grommet from the battery box.
Installation is in the reverse order of removal.
Route the cable, wire harness and hoses properly (page 1-25).
[11]
[12]
[2]
[4]
[16]
[6] [9] [10]
[15]
FRAME/BODY PANELS/EXHAUST SYSTEM
[7]
[5]
[8]
[1]
[13]
[3]
[14]
2-31