Position - Positioning Reference, Mode, & Alarm Control - Leica MX400 Operating Instructions Manual

Operator's Manual
Leica, or refer to the Options Manual for details
on this software package.
The setup is straight forward. Use the Change softkey to increment
forward through the available choices. Use the Go Back softkey to
increment backward through the available choices. You can also
use the left and right cursor keys to accomplish these same opera-
tions. Enter text the same as you do for the waypoints and routes.
Use the numeric key pad to enter the appropriate time. Don't forget
to set Message Active to Yes when you are finished editing, to
enable the alarm.
Position - Positioning Reference, Mode, & Alarm Control
This configuration screen controls several important parameters
which determine your present position.
Position Mode:
Auto 2D/3D: This setting allows the receiver to automatically
switch between 2 dimensional (a horizontal position with
the antenna height you entered to make up the vertical
portion of your position fix), and 3 dimensional position
fixing. You need at least 3 satellites to get a 2D position fix,
and 4 satellites to get a 3D position fix. It may take more
144
Configuration
Version 3.3