TX Matrix Plus Router Hardware Guide
TX Matrix Plus Chassis Alarm Messages Description
T1600 Router Chassis Alarm Messages
SONET/SDH Interface Alarm Messages
Table 46: SONET/SDH Interface Alarm Messages
Craft Interface Message
interface-name so-x/x/x BERR-SD
interface-name so-x/x/x BERR-SF
interface-name so-x/x/x LAIS
interface-name so-x/x/x LOF
interface-name so-x/x/x LOL
interface-name so-x/x/x LOP
interface-name so-x/x/x LOS
interface-name so-x/x/x LRDI
interface-name so-x/x/x PAIS
interface-name so-x/x/x PLL
interface-name so-x/x/x PMIS
interface-name so-x/x/x PRDI
278
TX Matrix Plus chassis alarms indicate a problem with a TX Matrix Plus chassis component
such as the cooling system or power supplies.
T1600 router chassis alarms indicate a problem with a T1600 router (LCC) in the routing
matrix, as described in "Troubleshooting T1600 Router Chassis Alarm Messages" on
page 281. For a list of additional alarm messages that apply only to the T1600 router
chassis, see the T1600 Core Router Hardware Guide.
SONET/SDH interface alarms idicate a problem with a specific network interface. For
example, Table 46 on page 278 lists the alarm messages for a SONET/SDH interface. In
a routing matrix, these messages apply only to a T1600 router. For more information
about interface alarms, see the T1600 Core Router PIC Guide.
The text in the column labeled "Craft Interface Message" appears in the LCD display of
the craft interface. The text in the column labeled "CLI Message" appears in the output
from the
show chassis alarms
CLI Message
interface-name so-x/x/x - SONET bit error rate defect
interface-name so-x/x/x - SONET bit error rate fault
interface-name so-x/x/x - SONET line AIS
interface-name so-x/x/x - SONET loss of frame
interface-name so-x/x/x - SONET loss of light
interface-name so-x/x/x - SONET loss of pointer
interface-name so-x/x/x - SONET loss of signal
interface-name so-x/x/x - SONET line remote defect
indicator
interface-name so-x/x/x - SONET path AIS
interface-name so-x/x/x - SONET PLL lock
interface-name so-x/x/x - SONET path mismatch
interface-name so-x/x/x - SONET path remote defect
indicator
command.
Copyright © 2010, Juniper Networks, Inc.