Transferring Control Of The T1600 Router To The Tx Matrix Plus Router - Juniper TX MATRIX PLUS Hardware Manual

TX Matrix Plus Router Hardware Guide
Related
Documentation

Transferring Control of the T1600 Router to the TX Matrix Plus Router

Related
Documentation
222
NOTE: If you want a different configuration on the backup Routing Engine,
issue the
commit
you must create a configuration for the backup Routing Engine. To do this,
log in to the backup Routing Engine and follow the procedure in this section.
The TX Matrix Plus router will copy this configuration to all the backup
Routing Engines in the routing matrix after control is transferred to the TX
Matrix Plus router.
Overview of Upgrading and Integrating an Operational T1600 Router on page 201
Creating a Configuration File for the Integration of an Operational T1600 Router on
page 210
The final step of the integration of an operational T1600 router with the TX Matrix Plus
router is transferring control from the T1600 router to the TX Matrix Plus router.
NOTE: After you transfer control to the TX Matrix Plus router, you can roll back
the T1600 router to its original configuration, but traffic through the T1600
router will be interrupted (see "Rolling Back the Integration on the T1600
Router" on page 318 for more information).
On external management devices connected to the console or auxiliary ports of both
1.
and
TXP-CIP-0 TXP-CIP-1
Plus router at the same time:
user@host> request system reboot
On external management devices connected to the console or auxiliary ports of
2.
and
T1600-CIP-0 T1600-CIP-1
router:
user@host> request system reboot
Overview of Preparing to Upgrade and Integrate an Operational T1600 Router on
page 199
Overview of Upgrading and Integrating an Operational T1600 Router on page 201
command without the
synchronize
, reboot the corresponding Routing Engines in the TX Matrix
, reboot the corresponding Routing Engines in the T1600
Copyright © 2010, Juniper Networks, Inc.
option. In either case,