Installing The Tx Matrix Plus Router Using A Lift; Figure 57: Removing A Txp-F2S Sib - Juniper TX MATRIX PLUS Hardware Manual

Hide thumbs Also See for TX MATRIX PLUS:

Table of Contents

TX Matrix Plus Router Hardware Guide

Documentation

Installing the TX Matrix Plus Router Using a Lift

Tools Required to Install the TX Matrix Router Using a Lift on page 128

Installing the TX Matrix Plus Router Using a Lift on page 138

Reinstalling TX Matrix Plus Components After Installing the Chassis on page 144

TX Matrix Plus Preventing Electrostatic Discharge Damage on page 392

CAUTION: Before installing the TX Matrix Plus router:

Read the safety information in "General Installation Safety Guidelines" on

Ensure that a mechanical lift is available for the installation. Because of

the TX Matrix Plus router's size and weight—up to 925 lb (420 kg)

depending on configuration—you must use a lift to install the TX Matrix

Plus router.

Have a qualified technician verify that the rack is strong enough to support

the TX Matrix Plus router's weight and is adequately supported at the

installation site.