Air Filters; Figure 25: Tx Matrix Plus Rear Fan Tray - Juniper TX MATRIX PLUS Hardware Manual

Hide thumbs Also See for TX MATRIX PLUS:

Table of Contents

Air Filters

Documentation

CAUTION: The upper rear fan trays 2 and 4 work as a pair, and the lower rear

fan trays 3 and 5 work as a pair. For each fan tray pair, only one fan tray can

be removed at a time. The router might shut down if you remove both fan

trays in a pair.

Air filters help keep dust and other particles from entering the cooling system. The TX

Matrix Plus router has three air filters located in the front of the chassis. Two air filters

are located to the left of the TXP-F2S SIBs. The third air filter is located below the lower

front fan tray. The left air filters are interchangeable with each other; the lower air filter

is not interchangeable with the left air filters. The air filters are hot-insertable and

hot-removable.

TX Matrix Plus Clearance Requirements for Airflow and Hardware Maintenance on

Maintaining the Fan Trays on page 267

Maintaining the Air Filters on page 266

Chapter 2: TX Matrix Plus Hardware Component Overview