Transferring The T1600 Router Configuration To The Tx Matrix Plus Router - Juniper TX MATRIX PLUS Hardware Manual

TX Matrix Plus Router Hardware Guide
Related
Documentation

Transferring the T1600 Router Configuration to the TX Matrix Plus Router

Related
Documentation
244
}
}
}
}
}
TX Matrix Plus CLI Overview on page 72
TX Matrix Plus Interface Names Overview on page 75
Transferring the T1600 Router Configuration to the TX Matrix Plus Router on page 244
After you integrate the T1600 routers into the routing matrix, the TX Matrix Plus router
is now the point of control for the routing matrix. You configure and manage the routing
matrix through the external management devices connected to the TX Matrix Plus router.
Transfer the modified T1600 router configuration to the TX Matrix Plus router. You
1.
can use an intermediate server on the out-of-band management network accessible
by both the T1600 router and the TX Matrix Plus router.
On an external management device connected to the console or auxiliary port of the
2.
TXP-CB, load the configuration saved in "Creating a Configuration File on the T1600
Router for Integration into the Routing Matrix" on page 243. Use the
follows:
user@host# load merge txp-config.conf
Commit the configuration on both the master and the backup Routing Engines.
3.
user@host# commit synchronize
NOTE: If you choose to run different Junos OS Releases on the Routing
Engines, or if you want a different configuration on the backup Routing
Engine, issue the
either case, you must create a configuration for the backup Routing Engine.
To do this, log in to the backup Routing Engine and follow the procedure
in this section. The TX Matrix Plus router will copy this configuration to all
the backup Routing Engines in the routing matrix after control is transferred
to the TX Matrix Plus router.
Junos OS Releases in the Routing Matrix on page 71
TX Matrix Plus CLI Overview on page 72
TX Matrix Plus Interface Names Overview on page 75
command without the
commit
Copyright © 2010, Juniper Networks, Inc.
option as
merge
option. In
synchronize