Juniper TX MATRIX PLUS Hardware Manual page 239

Hide thumbs Also See for TX MATRIX PLUS:
Table of Contents

Advertisement

Copyright © 2010, Juniper Networks, Inc.
Take the backup host subsystem offline. See the T1600 Core Router Hardware Guide.
3.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
4.
the strap to one of the ESD points on the chassis.
Set the M/S configuration switches on each LCC-CB on the T1600 router before you
5.
install them in the chassis:
Set the chassis ID switch on each LCC-CB on the T1600 router to
NOTE: When you integrate an operational T1600 router with the TX
Matrix Plus router, you must assign a chassis ID of
Set the
M/S
switch on each LCC-CB on the T1600 router faceplate to
Replace the backup T-CB with an LCC-CB on the T1600 router. Use the standard
6.
replacement procedure described in the T1600 Core Router Hardware Guide.
Replace the the backup Routing Engine with an RE-C1800 on the T1600 router. Follow
7.
the standard replacement procedure described in the T1600 Core Router Hardware
Guide.
Perform a graceful switchover to the backup by issuing the
8.
routing-engine master switch
user@host> request chassis routing-engine master switch
Replace the other T-CB (which now belongs to the backup host subsystem) with an
9.
LCC-CB on the T1600 router. Use the standard replacement procedure described in
the T1600 Core Router Hardware Guide.
Replace the the other Routing Engine (which now belongs to the backup host
10.
subsystem) with an RE-C1800 on the T1600 router. Follow the standard replacement
procedure described in the T1600 Core Router Hardware Guide.
Perform a graceful switchover to the original master by issuing the
11.
routing-engine master switch
user@host> request chassis routing-engine master switch
Verify that the LCC-CBs and RE-C1800 are displayed in the output of the
12.
command:
hardware
user@host> show chassis hardware
Hardware inventory:
Item
Chassis
CB 0
CB 1
Routing Engine 0 REV 01
Routing Engine 1 REV 01
Chapter 16: Upgrading and Integrating an Operational T1600 Router
command:
command:
Version
Part number
Serial number
JN1103199AHA
REV 06
710-022597
DW8534
REV 06
710-022597
DW8527
740-026941
737F-1094
740-026941
737F-1082
0
.
0
to the router.
S
.
request chassis
request chassis
show chassis
Description
T1600
LCC Control Board
LCC Control Board
RE-DUO-1800
RE-DUO-1800
205

Advertisement

Table of Contents
loading

Table of Contents