Lcc-Cbs; Figure 40: Lcc-Cb On The T1600 Router - Juniper TX MATRIX PLUS Hardware Manual

TX Matrix Plus Router Hardware Guide
Related
Documentation

LCC-CBs

Related
Documentation
96
Routing Matrix with a TX Matrix Plus Router System Architecture on page 55
Upgrading an Offline T1600 Router Before Integrating it into a Routing Matrix on page 225
Registering Your T1600 Upgrade on page 229
Overview of Integrating an Offline T1600 Router into a Routing Matrix on page 231
Connecting an Offline T1600 Router to the TX Matrix Plus Router on page 232
An LCC-CB on the T1600 router works with an adjacent Routing Engine to provide control
and monitoring functions for the router (see Figure 40 on page 96). These functions
include determining Routing Engine mastership, controlling power and reset for the other
T1600 router components, monitoring and controlling fan speed, and monitoring system
status. Each T1600 router contains up to two LCC-CBs at the upper front of the chassis.
NOTE: We recommend that you install two host subsystems for redundant
protection.

Figure 40: LCC-CB on the T1600 Router

Routing Matrix with a TX Matrix Plus Router System Control Plane Architecture on
page 56
Control Plane Connections from the TX Matrix Plus Router to the T1600 Routers on
page 58
Upgrading an Offline T1600 Router Before Integrating it into a Routing Matrix on page 225
Registering Your T1600 Upgrade on page 229
Overview of Integrating an Offline T1600 Router into a Routing Matrix on page 231
Link
Activity
LED
LED
Copyright © 2010, Juniper Networks, Inc.