Replacing Tx Matrix Plus Cables; Figure 104: Installing A Txp-Cip - Juniper TX MATRIX PLUS Hardware Manual

TX Matrix Plus Router Hardware Guide
Related
Documentation

Replacing TX Matrix Plus Cables

330
Using the labels to assist you, reattach all cables to the TXP-CIP.
6.
To verify that the TXP-CIP is installed correctly:
7.
Verify that the green
Issue the
show chassis environment cip sfc 0
is .
Online
Issue the show chassis cip
to the T1600 routers (LCC) are

Figure 104: Installing a TXP-CIP

TX Matrix Plus TXP-CIP Overview on page 36
TX Matrix Plus TXP-CIP LEDs on page 39
Troubleshooting the TX Matrix Plus TXP-CIPs on page 309
TX Matrix Plus Preventing Electrostatic Discharge Damage on page 392.
Replacing Routing Matrix Control Plane Cables on page 331
Replacing a Management Ethernet Cable on page 332
Replacing a Console or Auxiliary Cable on page 334
Replacing a Fiber-Optic Array Cable on page 336
LED on the faceplate of the TXP-CIP is lit.
OK
command to verify that the the TXP-CIP
command to verify that the the links from the TXP-CIP
.
up
Copyright © 2010, Juniper Networks, Inc.