Figure 55: Removing The Tx Matrix Plus Front Fan Trays - Juniper TX MATRIX PLUS Hardware Manual

Hide thumbs Also See for TX MATRIX PLUS:

Table of Contents

TX Matrix Plus Router Hardware Guide

Press the release

latches on the

left side of each

fan tray to install

or remove them.

Grasp the handle and pull the fan tray halfway out of the chassis.

Place one hand under the fan tray to support it, and pull the fan tray completely out

of the chassis.

Repeat the procedure to remove the remaining front fan tray.

CAUTION: This procedure assumes that router is powered off. Do not remove

both front fan trays from a router that is powered on.

Figure 55: Removing the TX Matrix Plus Front Fan Trays