Figure 60: Installing The Tx Matrix Plus Router In A Four-Post Rack; Table 36: Mounting Hole Locations For Installing A Tx Matrix Plus Chassis In An Open-Frame Rack - Juniper TX MATRIX PLUS Hardware Manual

TX Matrix Plus Router Hardware Guide
142

Figure 60: Installing the TX Matrix Plus Router in a Four-Post Rack

The holes in the center-mounting brackets are spaced at 2 U (3.5 in. or 8.9 cm).
Table 36: Mounting Hole Locations for Installing a TX Matrix Plus Chassis
in an Open-Frame Rack
Hole Distance Above U Division
90 52.5 in. (132.7 cm)
84 48.75 in. (123.8 cm)
78 45.25 in. (114.9 cm)
72 41.75 in. (106.0 cm)
66 38.25 in. (97.2 cm)
60 34.75 in. (88.3 cm)
54 31.25 in. (79.4 cm)
48 27.75 in. (70.5 cm)
Four-post rack
Front-mounting
flange
Chassis
29.86 U
X
27.86 U X
25.86 U X
23.86 U X
21.86 U X
19.86 U X
17.86 U X
15.86 U X
Copyright © 2010, Juniper Networks, Inc.