Table of Contents
Advertisement
About the Documentation
Junos OS Documentation and Release Notes
Objectives
Copyright © 2010, Juniper Networks, Inc.
Junos OS Documentation and Release Notes on page xxix
Objectives on page xxix
Audience on page xxx
Documentation Conventions on page xxx
Documentation Feedback on page xxxi
Requesting Technical Support on page xxxii
For a list of related Junos OS documentation, see
http://www.juniper.net/techpubs/software/junos/
If the information in the latest release notes differs from the information in the
documentation, follow the Junos OS Release Notes.
To obtain the most current version of all Juniper Networks
see the product documentation page on the Juniper Networks website at
http://www.juniper.net/techpubs/
This documentation describes hardware components, installation, basic configuration,
and basic troubleshooting procedures for the Juniper Networks TX Matrix Plus Router. It
explains how to prepare your site for router installation, unpack and install the hardware,
power on the router, perform initial software configuration, and perform routine
maintenance. After completing the installation and basic configuration procedures
covered in this documentation, see the Junos OS configuration guides for information
about further Junos OS configuration.
NOTE: For additional information about Juniper Networks routers and the
Physical Interface Cards (PICs) they support—either corrections to or
information that might have been omitted from this guide—see the hardware
release notes at
.
.
http://www.juniper.net/
.
®
technical documentation,
xxix
Advertisement
Table of Contents
Troubleshooting
