Verifying The State Of The Switching Planes In The Routing Matrix - Juniper TX MATRIX PLUS Hardware Manual

Related
Documentation

Verifying the State of the Switching Planes in the Routing Matrix

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
xe-0/0/1
xe-0/0/2
xe-0/0/3
xe-6/0/0
xe-6/0/1
xe-6/0/2
xe-6/0/3
xe-6/1/0
xe-6/1/1
xe-6/1/2
xe-6/1/3
ge-7/0/0
ge-7/0/0.0
ge-7/0/0.1
ge-7/0/0.2
ge-7/0/0.3
ge-7/0/0.4
ge-7/0/0.5
...
em0
em0.0
gre
ipip
ixgbe0
ixgbe0.0
ixgbe1
ixgbe1.0
If any of the interfaces are not
2.
TX Matrix Plus CLI Overview on page 72
TX Matrix Plus Interface Names Overview on page 75
After the T1600 router has booted, verify the state of the switching planes within the
routing matrix.
Verify that all fabric planes, TXP-F13 SIBs, TXP-F2 SIBs, and TXP-T1600 SIBs are
1.
online by issuing the
show chassis fabric plane detail
user@host> show chassis fabric plane detail
sfc0-re0:
--------------------------------------------------------------------------
Fabric Management PLANE State:
PLANE 0: Online
SIB F13 0 :
SIB F13 1 :
Chapter 19: Verifying the State of the TX Matrix Plus and T1600 Router
up up
up up
up up
up up
up up
up up
up up
up up
up up
up up
up up
up up
up up inet
up up inet
up up inet
up up inet
up up inet
up up inet
up up
up up inet
up up
up up
up up
up up inet
inet6
tnp
up up
up up inet
inet6
tnp
, see the T1600 Core Router Hardware Guide.
up
Online
Online
2.15.1.1/30
2.15.1.5/30
2.15.1.9/30
2.15.1.13/30
2.15.1.17/30
2.15.1.21/30
192.168.178.11/25
10.34.0.4/8
162.0.0.4/2
fe80::200:ff:fe22:4/64
fec0::a:22:0:4/64
0x22000004
10.34.0.4/8
162.0.0.4/2
fe80::200:1ff:fe22:4/64
fec0::a:22:0:4/64
0x22000004
command:
251