Replacing A Tx Matrix Plus Txp-Cip - Juniper TX MATRIX PLUS Hardware Manual

Related
Documentation

Replacing a TX Matrix Plus TXP-CIP

Copyright © 2010, Juniper Networks, Inc.
Table 57: Tools and Parts Required for Component
Replacement (continued)
Components
TXP-F13 SIB
Fiber-optic array cables
Craft interface
Air filter
TXP-CIP
Fan tray (front or rear)
Verifying TX Matrix Plus Router Parts Received on page 113
TX Matrix Plus Preventing Electrostatic Discharge Damage on page 392
Removing a TXP-CIP on page 328
1.
2. Installing a TXP-CIP on page 329
Chapter 22: Replacing TX Matrix Plus Hardware Components
Tool or part
Phillips (+) screwdriver, number 2
Blank panels (if component is not reinstalled)
Electrostatic bag or antistatic mat
Dust covers
5/16 in. nut driver
Phillips (+) screwdriver, number 2
Phillips (+) screwdriver, number 2
Phillips (+) screwdriver, number 2
327