Installing The Tx Matrix Plus Router Using A Mechanical Lift; Overview Of Installing A Tx Matrix Plus Router With A Mechanical Lift - Juniper TX MATRIX PLUS Hardware Manual

CHAPTER 11
Installing the TX Matrix Plus Router Using
a Mechanical Lift

Overview of Installing a TX Matrix Plus Router with a Mechanical Lift

Copyright © 2010, Juniper Networks, Inc.
Overview of Installing a TX Matrix Plus Router with a Mechanical Lift on page 127
Tools Required to Install the TX Matrix Router Using a Lift on page 128
Removing TX Matrix Plus Components Before Installing the Chassis on page 128
Installing the TX Matrix Plus Router Using a Lift on page 138
Reinstalling TX Matrix Plus Components After Installing the Chassis on page 144
Installing the TX Matrix Plus Rear Cable Management System on page 151
Installing the TX Matrix Plus Front Cable Manager on page 155
Before installing the TX Matrix Plus router, make sure that you have prepared your site,
unpacked the router from the shipping crate, and installed the mounting hardware.
To install the TX Matrix Plus router:
Gather the tools required to install the TX Matrix Router.
1.
"Tools Required to Install the TX Matrix Router Using a Lift" on page 128.
Remove components from the chassis to make it easier to install into the rack.
2.
"Removing TX Matrix Plus Components Before Installing the Chassis" on page 128.
Install the TX Matrix Plus Router into the rack using a mechancal lift.
3.
"Installing the TX Matrix Plus Router Using a Lift" on page 138.
Reinstall the components removed from the chassis.
4.
"Reinstalling TX Matrix Plus Components After Installing the Chassis" on page 144.
Install the cable management system.
5.
"Installing the TX Matrix Plus Rear Cable Management System" on page 151 and
"Installing the TX Matrix Plus Front Cable Manager" on page 155.
127